rincian produk

Beranda Produk

Aluminum Foil Container Machine with 35 to 70 Strokes Per Minute for Smooth Wall Trays and C-Frame Structure

Aluminum Foil Container Machine with 35 to 70 Strokes Per Minute for Smooth Wall Trays and C-Frame Structure

Nama Merek:	LIKEE
Nomor Model:	LK-T63
harga:	$45000-75000/set

Informasi Rinci

Deskripsi produk

Informasi Rinci

Tempat asal:

Shanghahi, Cina

Warna:

White Abd Orange

Komoditi:

mesin wadah aluminium foil

Metode pembungkus:

Otomatis

kategori:

PAN BULAT ALUMINIUM FOIL

Tegangan kerja:

380V/220Hz

Ketebalan:

30micron ~ 200micron

Warna:

White Abd Orange

Mode:

Sepenuhnya Otomatis

Daya operasi motor:

Max. Kecepatan kerja:

38 ~ 70 kali/menit

berat:

12300kg

Deskripsi produk

Aluminum Foil Container Machine Production Speed 35 to 70 Strokes Per Minute for Smooth Wall Trays

The LK-T63 delivers 35 to 70 strokes per minute specifically for smooth wall (wrinkle-free) aluminum foil trays. This specialized machine is engineered for customers requiring clean, professional container walls at higher production speeds.

Speed is complemented by stability through a solid C-frame structure, higher worktable for lower center of gravity, and lithium-based grease lubrication system, ensuring consistent tray quality across extended production runs.

Key Advantages

One operator per line
Capable of 24-hour continuous operation
Average stamping speed: 50 strokes per minute
Automatic stop with fault display on touchscreen
60 mold parameter storage
Quick mold change system

Technical Specifications

Machine Type	C-Frame Hydraulic Press
Core Design	Multi-cavity high-efficiency structure
Weight	12300KG
PLC	Mitsubishi
Wrapping Method	Automatic
Working Voltage	380V/220Hz
Max. Working Speed	38~70 Times/min
Feeding Accuracy	±0.1mm
Main Material	High Precised Steel
Motor Power	19KW
Thickness	30micron~200micron
Core System	Servo-driven precision control

Core Features & Advantages

Solid bed plate - Better rigidity, no deformation over time
Higher worktable - Lowers the machine's center of gravity for better stability at high speeds
Hydraulic mold change - One person can change a mold in 15 minutes without wrenches
Adjustable process parameters - Reduces material waste, improves yield
Transferable molds - Compatible with other brand presses
Removable logo block - Change product branding without making new molds
Embossing available - Add embossing device on the decoiler

Standard Line Configuration

Decoiler
T63 press machine
Scrap suction system
Standard Three-cavity stacker
Scrap baler
Scrap aspirator

Factory Display

Machine Details

Product Samples

Frequently Asked Questions

What is the real running speed for smooth wall trays?

35 to 70 strokes per minute. The actual speed depends on tray depth and foil thickness. Most customers run at 50-60 strokes per minute for smooth wall products.

Does smooth wall production require a different mold?

Yes. Smooth wall molds have different surface finish requirements. We build both smooth wall and wrinkle wall molds based on your sample.

How many good trays per hour at 60 strokes per minute?

At 60 strokes per minute with a 3-cavity mold, that is 10,800 containers per hour before factoring in material changes or breaks.

What causes the speed range to vary from 35 to 70?

Deeper trays and thicker foil require slower speeds. Shallow trays with thin foil can run at the higher end. The machine allows you to adjust for each job.

Can this line run coated foil?

Yes. Coated and uncoated foil both work. Uncoated saves material cost. For smooth wall trays, coated foil often gives better surface results.

How long to switch from one mold to another?

About 15 minutes with one person. The hydraulic lifting arm and worktable design make the difference.

What safety features are included?

A safety door that stops the press immediately when opened. No bypass tricks — it is a hard stop.

Does the LK-T63 require special installation?

No. Standard 380V/50Hz/3 phase power. If your local supply is different, add a transformer. The machine sits on a flat concrete floor. No special foundation needed.

How does T63 compare to your T80?

T63 is a 3-cavity C-frame with grease lubrication. T80 is a 4-cavity H-frame with closed oil circuit. T80 is more stable and cleaner, but T63 is more affordable and sufficient for many customers.

LK-T80 Mesin Kontainer Foil Aluminium dengan 50 Stroke/Min Kecepatan Rata-rata, 12000pcs/jam Kapasitas dan Konstruksi Baja Presisi Tinggi

Dapatkan Harga Terbaik

Mesin pembuatan kontainer aluminium foil

Mesin Wadah Aluminium Foil

Mesin Wadah Makanan Aluminium

Aluminium Foil Sheet Pop Out Mesin

Mesin pembuatan foil aluminium

Mesin wadah foil perak

Mesin Lipat Kertas WAX Pop Up

Mesin pembuatan lempeng aluminium foil

Cetakan Wadah Aluminium Foil

Mesin penggulungan kembali foil rumah

Mesin Karton Otomatis

Mesin Pembuat Kontainer Aluminium

mesin pemotong kertas mati

Mesin pembuatan pot aluminium

Mesin pembuatan cangkir aluminium

Mesin pembuatan kotak aluminium foil

Lini Produksi Wadah Foil

Mesin Pukulan Wadah Makanan

Mesin Pelipat Film Plastik

Mesin Rewinding film

Mesin pembuatan kontainer aluminium foil

Mesin Wadah Aluminium Foil

Mesin Wadah Makanan Aluminium

Aluminium Foil Sheet Pop Out Mesin

Mesin pembuatan foil aluminium

Mesin wadah foil perak

Mesin Lipat Kertas WAX Pop Up

Mesin pembuatan lempeng aluminium foil

Cetakan Wadah Aluminium Foil

Mesin penggulungan kembali foil rumah

Mesin Karton Otomatis

Mesin Pembuat Kontainer Aluminium

mesin pemotong kertas mati

Mesin pembuatan pot aluminium

Mesin pembuatan cangkir aluminium

Mesin pembuatan kotak aluminium foil

Lini Produksi Wadah Foil

Mesin Pukulan Wadah Makanan

Mesin Pelipat Film Plastik

Mesin Rewinding film

rincian produk

Aluminum Foil Container Machine with 35 to 70 Strokes Per Minute for Smooth Wall Trays and C-Frame Structure

Mesin pembuatan kontainer aluminium foil

Mesin Pembuat Wadah Aluminium Foil

Mesin Pembuat Wadah Aluminium

Mesin Kontainer Foil Aluminium yang sepenuhnya otomatis dengan Decoiler dan Stacker

LK-T80 Mesin Kontainer Foil Aluminium dengan 50 Stroke/Min Kecepatan Rata-rata, 12000pcs/jam Kapasitas dan Konstruksi Baja Presisi Tinggi